There are literally hundreds of tutorials out there for using an ink jet printer to transfer images and text onto fabric. And I swear, I’ve tried them all. Many of them are based on the premise of using freezer/wax paper through the printer so that the ink beads up and then can be transferred to the fabric. I even did my own how-to of that method in the DIY Jewelry Organization post. Over the years I’ve fallen out of love with that technique. Mostly because I’ve had 3 printers in that time, and each of them was a headache of paper jams and ink messes from the wax paper bunching, crunching, or getting stuck inside.
Not anymore! I have no idea why I didn’t think of this before. It was days before Christmas, and I was diligently working on my gift set of Three Easy Bath Treats (Which I gave to my mom – and she loved!). I had tried the freezer paper method for the umpteenth time that day, and ended up with two hands full of ink, a smudged design and two ruined muslin bags. Not good for stress.
Then, like a ray of light through an open window, I spied a used label sheet in my recycle bin. You know, the waxy type of backing that they stick the labels to? Oh yeah. THAT stuff. Stuff that is meant to go through the printer. Stuff that has a dense, smooth water repellent surface that doesn’t grab the ink jet ink, but lets is spread smoothly without creating giant beads. Do you see where I am going with this?
What You Need:
- Used sheet of labels, all the labels removed.
- Inkjet Printer
- Masking tape
- Fabric to transfer to
How To Make It:
- Start by peeling off any excess paper that might be on your label sheet.
- Place your sheet in the printer so that it prints on the glossy side of the label sheet.
- Print your design (be sure to reverse it!) using the “high” or “best” quality setting of your printer. Keep the paper type at “plain paper”. This makes the printer use more ink than if you had selected “glossy” or “photo paper”. You can see the tiny beads of ink in the photo below.
- Grab your design and the fabric you plan to add it to. Use the masking tape around the fabric or the label sheet to make sure once you’ve got everything lined up, that it sticks.
- Rub the back of the label sheet or the fabric hard with the back of a spoon. Be careful to get everywhere in the image area and take your time so not to move the image (that results in blurring).
- That is it! You can wipe the label sheet with a damp towel to remove any ink residue and use it over and over!
Latest posts by Kayla Domeyer (see all)
- DIY Tempting Pumpkin Spice Sugar Scrub you will Crave - October 30, 2019
- How to Dye Yarn Easily and with beautiful results - October 16, 2019
- Gorgeous Hand Crafted Miniature Kitchenaid Mixer - September 26, 2019