I’ve told you all before that I rarely give store bought gifts or money at a wedding. That was the reason I ventured into Personalized Pyrex and Kitchen Towels a year or two ago. So hopefully it is no surprise to anyone when I show up at a wedding bearing oddly shaped and often home-made gifts. This February I was invited to a wedding with the reception in a hunting lodge. I knew immediately that I wanted to make a gift that reflected the outdoorsey and rustic nature of the couple.
The result was this beautiful diy rustic home decor sign made with the bride and groom’s names and wedding date! I couldn’t be happier with how well it turned out. And believe me, it was really easy. I actually ended up giving money too because I felt guilty over how easy this gift turned out to be. =D
What You Need:
- Weathered board a few feet long (Or you can weather some new wood using this Almost Instead Weathered Wood Stain). Hubby found ours above the garage when we moved in. Its cedar, but I don’t know how old.
- A dowel from a craft store, and a drill bit the same size.
- Wood glue.
- Stencils and paint.
How To Make It:
- First step is to cut your board into two pieces of equal length. These will end up stacked on top of each other to make your sign base.
- Then, lay your boards how you want them to end up stacked. Mark a line across the gap where they join. This will be the guide for your dowel holes.
- Following your lines, drill a 1/2 inch hole in each board along each mark. The picture explains it better than words.
- Now, cut your dowel to 3/4 inch bits. Put a little wood glue in your holes and put the dowel pieces in. This will hold your sign together with no outward markings! (you can see it took me a couple tries to get it right…)
- Now for the design. I used my silhouette cameo to cut vinyl to use as a stencil, but this could really be done with any craft stencil. Plan out your design and mark lightly with a pencil to make guides for yourself. (Since this project is rustic wood, you could also use fine pushpins as guides that can be removed later.)
- One sweet touch that is really easy is to layer some elements with a “shadow”. I just painted this ampersand white, waited until dry, offset the stencil and painted it again red!
- Once you’ve got your design painted, attache a picture hanging clip to the back. All done!
Latest posts by Kayla Domeyer (see all)
- How to make stunning snow globe photo ornaments - December 4, 2019
- DIY Tempting Pumpkin Spice Sugar Scrub you will Crave - October 30, 2019
- How to Dye Yarn Easily and with beautiful results - October 16, 2019